Description
The PSB-2000
series, which is a high power density, programmable and multi-range
output DC power supply. There are six models in the series including
one power booster unit. The PSB-2000 series has the output voltage
of 0~80V and 0~800V, and the output power ranges of 0~400W and
0~800W. The multi-range output functionality facilitates flexible
collocations of higher voltage and larger current under the rated
power range. Both series and parallel connections can be applied to
the PSB-2000 series to fulfill the requirements of higher power
output range.
The PSB-2000 series provides three sets of preset function keys to
memorize regularly used settings of voltage, current and power that
users can recall rapidly. The sequence function, via RS232C, USB
interface or optional GPIB interface, can connect with the computer
to produce output power defined by sequence of a series of set
voltage and current steps that are defined by the computer. This
function is often used to establish a standard test procedure for
the verification of the influence on DUTs done by the swiftly
changing operating conditions.
The PSB-2000 series protects over voltage and over current. The
power supply output function will be shut down to protect DUTs while
the protection mechanism is triggered to function. When conducting
battery charging operation, the Hi-W mode of thePSB-2000 series will
prevent reverse current from damaging power supply. The PSB-2000
series provides analog control and analog monitor interfaces on the
rear panel to control PSB-2000 output via the external voltage or to
externally monitor voltage and current output status of power
supply. PSB-2000 panel can be rotated 90 degree angle suitable for
vertical or horizontal position to accommodate the ideal space
utilization.
Description
The PSB-2000
series, which is a high power density, programmable and multi-range
output DC power supply. There are six models in the series including
one power booster unit. The PSB-2000 series has the output voltage
of 0~80V and 0~800V, and the output power ranges of 0~400W and
0~800W. The multi-range output functionality facilitates flexible
collocations of higher voltage and larger current under the rated
power range. Both series and parallel connections can be applied to
the PSB-2000 series to fulfill the requirements of higher power
output range.
The PSB-2000 series provides three sets of preset function keys to
memorize regularly used settings of voltage, current and power that
users can recall rapidly. The sequence function, via RS232C, USB
interface or optional GPIB interface, can connect with the computer
to produce output power defined by sequence of a series of set
voltage and current steps that are defined by the computer. This
function is often used to establish a standard test procedure for
the verification of the influence on DUTs done by the swiftly
changing operating conditions.
The PSB-2000 series protects over voltage and over current. The
power supply output function will be shut down to protect DUTs while
the protection mechanism is triggered to function. When conducting
battery charging operation, the Hi-W mode of thePSB-2000 series will
prevent reverse current from damaging power supply. The PSB-2000
series provides analog control and analog monitor interfaces on the
rear panel to control PSB-2000 output via the external voltage or to
externally monitor voltage and current output status of power
supply. PSB-2000 panel can be rotated 90 degree angle suitable for
vertical or horizontal position to accommodate the ideal space
utilization.
Features
- Output Voltage Rating : 80V/800V
- Output Power Rating : 400W~800W
- Constant Power Output for
Multi-Range(V&I)Operation
- Series and Parallel Operation(2 Units in
Series or 4 Units in parallel Maximum)
- Sequence function edited by PC will be
controlled through power supply optional interface
- Standard Interafce: RS-232C / USB / Analog
Control Interface
- Optional Interface: GPIB
