B·IRON 210
Station Precision Mobile System

HDE Station
Heavy Duty
Soldering

• Peak power - 250 W – 42 V
• Selectable temperature - 90 - 500 °C / 190 - 932 °F
• Temperature accuracy - ±3%

HDEK Station
Heavy Duty
Rework

• Peak power - 250 W – 42 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

DMPSE Station
4-Tool Rework

• Peak power - 160 W per tool – 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

NANE
2 Tools Nano Soldering Station

• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• USB-B (rear) - Software PC / Traceability
• USB-A (front) - Firmware update Soldering Graphics management

NASE
2 Tools Nano Rework
Station

• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• USB-B (rear) - Software PC / Traceability
• USB-A (front) - Firmware update Soldering Graphics management

WSS
High-Temperature Precision
Wire Stripper Station

• Max. temperature - 800 ºC / 1470 ºF
• Premium Stations - 180 x 94 x 106 mm / 3.80 kg., 7.09 x 3.70 x 4.17 in / 8.39 lb.
• Ambient operating temp. - 10 to 50 ºC / 50 to 120 ºF

WSB
High-Temperature
Wire Stripper Station

• Max. temperature - 800 ºC / 1470 ºF
• Idle temp. stability (still air) - ±1.5 ºC / ±3 ºF
• Peak Power - 75W
• Ambient operating temp. - 10 to 50 ºC / 50 to 120 ºF

DDSE
2-Tools DDE Station with Electric Pump

• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• Idle temp. stability - (still air) - ±1.5ºC (±3ºF) Meets and exceed IPC J-STD-001F
• Temp accuracy - ±3% ( using reference cartridge)

DDPE
2-Tools DDE Precision Station

• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• Idle temp. stability - (still air) - ±1.5ºC (±3ºF) Meets and exceed IPC J-STD-001F
• Temp accuracy - ±3% ( using reference cartridge)

DMSE
2 Tools DME Station with Electric Pump

• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• Vacuum - 75% / 570 mmHg / 22.4 inHg
• Flow rate - 9 SLPM
• USB-B (rear) - Software PC / Traceability

RMSE
Complete Rework Station with Electric Pump

• Temperature (DDE) - 90 to 450 ºC / 190 to 840 ºF
• Temperature (JTSE) - 150 to 450 ºC / 300-840 ºF
• Operation modes (JTSE) - Heating / Profiles / Cooling

SRS
SMD Rework System

• Voltage - according to model:120V / 230V / 100V
• Package weight - 19,72 kg (43.48lb)
• Package dimensions - 700 x 410 x 390 mm, 27.56 x 16.14 x 15.35 in

CA Station
Manual-Feed Soldering

• Peak power - 130 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

CP Station
Precision Rework

• Peak power - 80 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

CS Station
Precision Desoldering

• Peak power - 40 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

CDS
Precision Soldering Station

• Peak power - 40 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

CDB
Soldering Station

• Peak power - 40 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

CDES
Soldering-Assistant Station

• Peak power - 40 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

CDEB
Soldering-Assistant Station

• Peak power - 130 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

DDSE Station
2-Tool Rework

• Peak power - 150 W per tool – 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

DDPE Station
2-Tool Precision Rework

• Peak power - 150 W per tool – 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

RMSE System
Complete Rework

• Peak power - 700 W
• Selectable temperature - 150 to 450 °C / 300 to 840 °F
• Temperature accuracy - ±3%

DMSE Station
2-Tool Rework

• Peak power - 160 W per tool – 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

DMPSE Station
4-Tool Rework

• Peak power - 160 W per tool – 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy - ±3%

JNASE Station
High-Precision Hot Air

• Selectable temperature - 150 to 450 °C / 300 to 840 °F
• ESD safe - Meet ANSI / ESD S20.20-2021
• Equipotential bonding - Connection to EPA

TESE
Precision Hot Air Station

• Nominal power - 300W
• Selectable temperature - 150 to 450°C/300 to 840°F
• Air flow regulation - 2 to 17 SLPM
• Vacuum - 30%/228 mmHg/9 inHg

JTSE
Hot Air Station

• Peak power - 700W
• Selectable temperature - 150 to 450°C/300 to 840°F
• Air flow regulation - 5 to 50 SLPM
• Vacuum - 30% / 228 mmHg / 9 inHg

ALE Station
Automatic-Feed Soldering

• Peak power - 150 W - 23.5 V
• Selectable temperature - 90 to 450 ºC / 190 to 840ºF
• Temperature accuracy - ±3%

AL
Auto-Feed Soldering Station

• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• Solder wire length - 1 - 60 mm / 0.04 - 2.36 in
• Solder wire speed - 30 mm/s / 1.18 in/s

SF
Automatic Solder Feeder

• Spool Capacity - up to 1 kg (2.2 Ib)
• Solder wire diameter - 1 mm (0.04 in), More diammeters available. See guide sets for SF280.

HA
Automatic Soldering Set

• Peak power - 160 W - 21 V
• Selectable Temperature - 90 to 450 ºC / 190 to 840 ºF
• Solder wire length - 0.5 to 250 mm / 0.02 to 9.84 in

HA470
Soldering Unit for Robot

• Selectable Temperature - 90 to 450 ºC (190 to 840 ºF)
• Solder wire length - 0.5 to 250 mm / 0.02 to 9.84 in
• Solder wire speed - 0.5 to 120 mm/s / 0.02 to 4.72 in/s

NT115
Nano Handle

• Cable length - 1.2 m
• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 25 gr (0.05 lb), 68 gr (0.15 lb), 235 x 40 x 40 mm

T210
Precision Handle

• Cable length - 1.5 m
• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 57 gr (0.13 lb), 107 gr (0.23 lb), 235 x 40 x 40 mm

T245
General Purpose Handle

• Cable length - 1.5 m
• ESD safe - Meet ANSI/ESD S20.20-2021
• Dimensions Tool - 145 x 20 x 20 mm / 0.07 kg., 5.71 x 0.79 x 0.79 in / 0.15 lb.

T470
Heavy Duty Handles

• Cable length - 1.5 m
• ESD safe - Meet ANSI/ESD S20.20-2021
• Dimensions Tool - 145 x 17 x 17 mm / 0.09 kg., 5.71 x 0.67 x 0.67 in / 0.20 lb.

AN115
Adjustable Nano Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 51 gr (0.11 lb), 95 gr (0.21 lb), 235 x 40 x 40 mm

AM120
Adjustable Micro Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 170 gr (0.37 lb), 277 x 73 x 50 mm

AT420
Adjustable Thermal Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Dimensions Tool - 112 x 35 x 32 mm / 0.13 kg., 4.41 x 1.38 x 1.26 in / 0.28 lb.

NP115
Nano Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 47 gr (0.10 lb), 91 gr (0.20 lb), 235 x 40 x 40 mm

PA120
Micro Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 166 gr (0.36 lb), 277 x 73 x 50 mm

HT420
Thermal Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 110 gr (0.24 lb), 175 gr (0.39 lb), 277 x 73 x 50 mm

HT470
Heavy Duty Thermal Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 376 gr (0.83 lb), 300 x 125 x 65 mm

DS360
Micro Desoldering Iron

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 176 gr (0.39 lb), 341 gr (0.75 lb), 300 x 125 x 65 mm

DR560
Desoldering Iron

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 559 gr (1.23 lb), 306 x 131 x 71 mm

ALE250
Automatic-Feed Soldering Iron

• Weight and Dimensions Tool - 130 x 14 x 30 mm / 0.15 kg., 5.12 x 0.55 x 1.18 in / 0.33 lb.
• Weight and Dimensions Package - 300 x 125 x 65 mm / 0.26 kg., 11.81 x 4.92 x 2.56 in / 0.57 lb.

AP250
Manual-Feed Soldering Iron

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions - 233 gr (0.51 lb), 367 gr (0.81 lb), 245 x 185 x 45 mm

SF280
Automatic Solder-Wire Handle

• Solder wire diameter - 0.5 to 1.5 mm (0.02 to 0.06 in).
• Weight and Dimensions - 60 gr (0.13 lb), 170 gr (0.37 lb), 235 x 40 x 40 mm

NH
High-Precision Heater Hose Set

• Net weight - 0,31 kg (0.69lb)
• Weight and Dimensions Package - 382 x 159 x 81 mm / 0.45 kg., 15.04 x 6.26 x 3.19 in / 0.98 lb.

TET
Precision Heater Hose Set

• Weight and Dimensions - 187 gr (0.41 lb), 268 gr (0.59 lb), 300 x 125 x 65 mm

JTT
Heater Hose Set

• Weight and Dimensions Tool - 215 x 36 x 38 mm / 0.37 kg., 8.46 x 1.42 x 1.50 in / 0.82 lb.
• Weight and Dimensions Package - 382 x 159 x 81 mm / 0.51 kg., 15.04 x 6.26 x 3.19 in / 1.12 lb.

WS140
High-Temperature Precision Wire Stripper Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions Tool - 97 x 36 x 27 mm / 0.12 kg., 3.82 x 1.42 x 1.06 in / 0.26 lb.
• Weight and Dimensions Package - 277 x 73 x 50 mm / 0.16 kg., 10.91 x 2.87 x 1.97 in / 0.35 lb.

WS440
High-Temperature Wire Stripper Tweezers

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimensions Tool - 97 x 36 x 27 mm / 0.12 kg., 3.82 x 1.42 x 1.06 in / 0.26 lb.
• Weight and Dimensions Package - 277 x 73 x 50 mm / 0.16 kg., 10.91 x 2.87 x 1.97 in / 0.35 lb.

SL2020 Iron
Temperature-controlled

• Peak power - 40W
• Temperature selection - 100 to 400ºC
• Time for 300 C - 40 seconds
• Cable length - 1.5m

PHNE Preheater
for PCBs up to 11 x 7 cm / 4 x 3

• Peak power - 300 W
• Selectable temperature - 50 to 250 ºC / 120 to 482ºF
• Heating area - 108 x 70 mm / 4.25 x 2.75 in

PHSE Preheater
for PCBs up to 13 x 13 cm / 5 x 5"

• Peak power - 600W
• Selectable temperature - 50 to 250ºC / 120 to 482ºF
• Heating area - 65 x 135 mm / 2.6 x 5.3 in - 1 zone

PHBE Preheater
for PCBs up to 36 x 28 cm / 14 x 11"

• Peak power - 1800W (120V & 230V), 1400W (100V)
• Heating area - 180 x 277 mm / 7.1 x 10.9 in - 1 zone, 360 x 277 mm / 14.2 x 10.9 in -2 zones

PHXLE Preheater
for PCBs up to 51 x 61 cm / 20 x 24

• Peak power - 5400 W
• Heating Areas - 255 x 203 mm / 10.04 x 8 in - 1 zone, 510 x 610 mm / 20 x 24 in - 6 zones

PHNEK Preheater set
for PCBs up to 11 x 7 cm / 4 x 3"

• Peak power - 300 W
• Selectable temperature - 50 to 250 ºC / 120 to 482 ºF
• Heating area - 108 x 70 mm / 4.25 x 2.75 in

PHSEK Preheater Set
for PCBs up to 13 x 13 cm / 5 x 5"

• Peak power - 600W
• Selectable temperature - 50 to 250ºC / 120 to 482ºF
• Heating area - 65 x 135 mm / 2.6 x 5.3 in - 1 zone

PHBEK Preheater Set
for PCBs up to 36 x 28 cm / 14 x 11"

• Peak power - 1800W (120V & 230V), 1400W (100V)
• Selectable temperature - 50 to 250 ºC / 120 to 482ºF
• Heating area - 180 x 277 mm / 7.1 x 10.9 in - 1 zone

PHXLEK Preheater Set
for PCBs up to 51 x 61 cm / 20 x 24"

• Peak power - 5400 W
• Selectable temperature - 50 to 250 ºC / 120 to 482 ºF
• Heating area - 255 x 203 mm / 10.04 x 8 in - 1 zone, 510 x 610 mm / 20 x 24 in - 6 zones

CL
Tip Cleaner Manual

• ESD safe - Meet ANSI/ESD S20.20-2021
• Weight and Dimension Cleaning Unit - 112 x 89 x 90 mm / 0.88 kg., 4.41 x 3.50 x 3.54 in / 1.93 lb.
• Weight and Dimension Package - 130 x 98 x 100 mm / 0.94 kg., 5.12 x 3.86 x 3.94 in / 2.06 lb.

CLMS Tip Cleaner
Automatic Junior with Fiber Brushes (non metal)

• Operating modes - Switch and continuous
• Brush diameter - Ø 34 mm (1.33 in)
• Brush speed - 550 rpm, 650 rpm (continuous mode)
• Silent operation - 30 dB at 30 cm

CLMUP Tip Cleaner
Automatic with Fiber Brushes (non-metal)

• Operating modes - Sensor and continuous
• Brush diameter - Ø 50 mm (1.97 in)
• Silent operation - 25 dB at 30 cm
• ESD safe - Meet ANSI/ESD S20.20-2021

CLMU Tip Cleaner
Automatic with Metal Brushes

• Operating modes - Sensor and continuous
• Brush diameter - Ø 50 mm (1.97 in)
• Silent operation - 25 dB at 30 cm
• ESD safe - Meet ANSI/ESD S20.20-2021

FAE1
Fume Extractor for 1 workbench

• Aspiration flow rate - Low / Medium / High / Custom
• Operation modes - Automatic (JBC Stations) Continuous Pedal
• Blower type - Brushless

FAE080
Rectangular Nozzle for FAE

• Net Weight - 0,12 kg (0.27lb)
• Weight and Dimensions - 124 gr (0.27 lb), 200 gr (0.44 lb), 220 x 213 x 160 mm
• FAE080 Rectangular Nozzle for FAE

FAE070
Flexible Arm with Clamp Ø 50 mm

• Net Weight - 2,22 kg (4.89lb)
• Length - 0,94 m - 37 in (compressed)
• Weight and Dimensions - 2.220 kg (4.89 lb), 3.000 kg (6.61 lb), 1050 x 170 x 120 mm

FAE010
Flexible Hose Ø 50 mm

• Net Weight - 0,56 kg (1.22lb)
• Length - 1,5 m - 59 in (unfolded)
• Weight and Dimensions - 555 gr (1.22 lb), 1.000 kg (2.20 lb), 625 x 135 x 130 mm

FAE040
Accessory for Stand aspiration with Clamp Ø50 mm

• Net Weight - 0,59 kg (1.31lb)
• Diameter - 90 mm (3.5 in)
• Weight and Dimensions - 230 x 135 x 130 mm / 0.77 kg., 9.06 x 5.31 x 5.12 in / 1.71 lb.

FAE060
Fume Inlet Duct for Compact Stations

• Net weight - 0,19 kg (0.41lb)
• Length - 106 mm (4,17 in)
• Weight and Dimensions - 300 x 130 x 65 mm / 0.28 kg., 11.81 x 5.12 x 2.56 in / 0.62 lb.

FAE050
Fume Inlet Duct for Modular Stand

• Net weight - 0,17 kg (0.37lb)
• Length - 106 mm (4,17 in)
• Weight and Dimensions - 170 gr (0.37 lb), 265 gr (0.58 lb), 300 x 130 x 65 mm

FAE030
Accessory for Stand Aspiration

• Net Weight - 0,13 kg (0.29lb)
• Diameter - 90 mm (3.5 in)
• Weight and Dimensions - 135 x 100 x 100 mm / 0.20 kg., 5.31 x 3.94 x 3.94 in / 0.44 lb.

FAE080
Rectangular Nozzle for FAE

• Net Weight - 0,12 kg (0.27lb)
• Weight and Dimensions - 124 gr (0.27 lb), 200 gr (0.44 lb), 220 x 213 x 160 mm

FAE020
Flexible Arm Ø 50 mm

• Net Weight - 1,76 kg (3.87lb)
• Length - 0,94 m - 37 in (compressed)
• Weight and Dimensions - 1.755 kg (3.87 lb), 2.500 kg (5.51 lb), 1050 x 170 x 120 mm

FAE2
Fume Extractor for 2 workbenches

• Aspiration flow rate - Low / Medium / High / Custom
• Operation modes - Automatic (JBC Stations) Continuous Pedal
• Blower type - Brushless

FAE070
Flexible Arm with Clamp Ø 50 mm

• Net weight - 2,22 kg (4.89lb)
• Length - 0,94 m - 37 in (compressed)
• Weight and Dimensions - 2.220 kg (4.89 lb), 3.000 kg (6.61 lb), 1050 x 170 x 120 mm

FAE040
Accessory for Stand aspiration with Clamp Ø50 mm

• Net weight - 0,59 kg (1.31lb)
• Diameter - 90 mm (3.5 in)
• Weight and Dimensions - 230 x 135 x 130 mm / 0.77 kg., 9.06 x 5.31 x 5.12 in / 1.71 lb.

FAE010
Flexible Hose Ø 50 m

• Net weight - 0,56 kg (1.22lb)
• Length - 1,5 m - 59 in (unfolded)
• Weight and Dimensions - 555 gr (1.22 lb), 1.000 kg (2.20 lb), 625 x 135 x 130 mm

FAE060
Fume Inlet Duct for Compact Stations

• Net weight - 0,19 kg (0.41lb)
• Length - 106 mm (4,17 in)
• Weight and Dimensions - 300 x 130 x 65 mm / 0.28 kg., 11.81 x 5.12 x 2.56 in / 0.62 lb.

Nitrogen

Hot Air Accessories

Pick & Place Accessories

Nano Update Accessories

Metallic PCB Supports

Cartridge Case

Cable Collector

Thermometers

Pedals

Precision Tweezers

Cutters

Pliers

Solder Guide Kits

Fume Extraction

Cables / Extension leads

Cleaning

Solder Tip Tinner Flux

Tapes

Heating Elements

Thermometer sensors / TC

Filters

Solder Paste Dispensing

Tool Grips

Sealing Plug