The Sonel MRP-201 residual current circuit breaker meter is a
specialist device for measuring all types of residual current
circuit breakers - direct, short-delay, selective; types AC, A and
B. It allows to measure tripping current, tripping time depending on
differential current, resistance of protective conductor and contact
voltage. Measurements can be performed individually or in series in
automatic modes (all preset measurements for a given waveform or for
all waveforms); simultaneous measurement of current and tripping
time is also possible (with one RCD trip).
Features
Testing RCD breakers of AC, A, B types
Testing of general, short delay
and selective RCDs for the rated current values
10, 15, 30, 100, 300, 500 mA
Measurement of IA trip
current
and tripping time tA for currents 0.5
I∆n, 1
I∆n, 2 I∆n, 5
I∆n
RE and UB
measurement without RCD
tripping
Extended AUTO function of RCD
measurement
Measurement of IA and
tA during
one RCD tripping
Additional functions
Checking the correctness of PE connection
using a contact electrode
Measurement of voltage (0 … 500 V) and
network frequency
Memory of 990 results
Wireless data transmission to a
computer
Backlit keypad
Application areas
The meter enables the user to measure the
parameters of
residual-current devices (RCDs), such as time or operating
current.
The device is useful for testing electrical systems with
circuits
protected by RCDs of AC, A and B type.
Increased resistance to environmental
conditions
The meter will cope well in difficult
environmental conditions.
Protection against penetration of dust and water is ensured by a
unique
housing with a level of protection IP67.
Communication and software
You can easily transfer measurement data
to your computer via wireless
communication. In order to generate a report on measurements for
electric shock protection, use Sonel Reports PLUS
software. Saving the
downloaded data to the simplest formats and printing is provided
by free
Sonel Reader software.
