QUICK ENQUIRY

Integrated Services and Consultancy

(An ESA Group Associate)
#37, Second Floor, “Embedded Home”,
36th Cross, II Block, Rajajinagar
Bengaluru-560010,
Karnataka,India

Pratibha Gopalam
Executive Director
98454 03264

BANGALORE
Santanu Chatterjee, DGM-Sales
97313 78934

HYDERABAD
A V Gopalakrishna, Sr Engineer Sales-TMI
90082 96566

CHENNAI
Senthil Kumar, Manager-Sales
75500 76300

PUNE
Amol Kadu, Sales Manager-TMI
98450 44338

KOLKATA
Arun Roy, Manager-Sales
98305 78843

DELHI
Dharmaveer, Sales Manager
80503 17771

VADODARA
Jaimin Shah, Application Engineer
73488 51143

Phone No.
080-67648888, 080-67648836

Sales

Email: sales@isc4esaindia.com


Support

Email: support@isc4esaindia.com

Email: service@isc4esaindia.com

Acute Technology Inc
SD3.0/SDIO3.0
Features
  • Support SD 3.0 SDR104 / SD6.0 Legacy mode SDR104, DDR200, Command Queue/ SDIO 3.0
  • LA04 (B)-tip: 4 Data Channel
  • SD3.0(SDIO 3.0)-tip: 12 Data Channel + 2 Analog Channel​
  • Auto Data Phase Tuning
  • 3 Pin Mode: CMD, CLK, D0
  • Supports measurement of SD6.0 Legacy mode / SD3.0 / SDIO3.0 triggering, protocol, and decoding
  • 3-Pin Mode: If you only need to understand the waveform data of CMD and BUSY, a convenient 3-Pin Mode is provided. There is no need to connect all the pins for measurement. You only need to connect the CLK, CMD, and D0 Pins at the same time to measure the CMD data.
  • No Clk Mode: If you want to record only the CMD waveform data for a long time, you can record the CMD pin waveform through transition storage and decode the measurement.
Features
  • Support SD 3.0 SDR104 / SD6.0 Legacy mode SDR104, DDR200, Command Queue/ SDIO 3.0
  • LA04 (B)-tip: 4 Data Channel
  • SD3.0(SDIO 3.0)-tip: 12 Data Channel + 2 Analog Channel​
  • Auto Data Phase Tuning
  • 3 Pin Mode: CMD, CLK, D0
  • Supports measurement of SD6.0 Legacy mode / SD3.0 / SDIO3.0 triggering, protocol, and decoding
  • 3-Pin Mode: If you only need to understand the waveform data of CMD and BUSY, a convenient 3-Pin Mode is provided. There is no need to connect all the pins for measurement. You only need to connect the CLK, CMD, and D0 Pins at the same time to measure the CMD data.
  • No Clk Mode: If you want to record only the CMD waveform data for a long time, you can record the CMD pin waveform through transition storage and decode the measurement.
Scheme name SD3.0/SDIO3.0
Tip name LA04 (B) / eMMC, SD 3.0 adapter board
Channel combination 4 (Data) / 12+2 (Data+Analog)
Trigger voltage (Data) range -0.5V ~ +4.8V / 0V ~ +3.3V
Trigger voltage (Data) resolution 21mV
Trigger voltage (Data) accuracy ±100mV + 5% *Vth
Input voltage (Data) Non-maximum destructive withstand voltage ±15V DC+AC peak / -0.5V ~ +5V DC+AC peak
Input voltage (Data) working range -1V ~ 8V / 0V ~ 3.3V
Input voltage (Data) Sensitivity ~300mV / ~150mV
Input impedance(Data) 1MΩ || 5pF / 500kΩ || 2pF
Input voltage (Analog) non-maximum destructive withstand voltage - / -0.5V ~ +8V DC+AC peak
Input voltage (Analog) working range - / 0V ~ 4V
Input voltage (Analog) resolution - / ~1mV
Input voltage (Analog) Sampling rate -/1M
Input impedance(Analog) - / 1MΩ || 100pF
Read More Sales Enquiry