PSH-Series Programmable Switching D.C.
Power Supply
Features
- Wide input voltage range and high power
factor (P.F)
- high efficiency and high power density
- Constant voltage and constant current
operation
- Over voltage over current and over
temperature protection
- Low ripple and noise
- Output on/off control
- Self-test and software calibration
- LabView driver
- Standard interface : RS-232C
- Optional interface : GPIB ( IEEE-488.2
)
Description
The PSH-Series is
single output from 360W to 1080W, programmable switching DC power
supplies. OVP, OCP, and OTP protect the power supply and loads from
unexpected conditions. Remote sensing adds an extra level of
precision by compensating cable losses between loads. The bright LCD
with simultaneous parameter outputs allows effortless operation.
Self-test and software calibration features also reduce maintenance
efforts. SCPI commands and LabVIEW driver access through the RS-232C
or the optional GPIB interface allow remote control and ATE software
development. Modular architecture, dedicated rear-panel output, and
the 19 inch 4U rack mounting option ensure that the PSH-Series is
optimized for large systems.
| Programmable
Switching D.C. Power Supply |
|
Output Watts (W) |
Output Volts (V) |
Output Amps (A) |
Weight (kg) |
| PSH-2018A |
360W |
0~20V |
0~18A |
3.3kg |
| PSH-3610A |
360W |
0~36V |
0~10A |
3.3kg |
| PSH-3620A |
720W |
0~36V |
0~20A |
6.2kg |
| PSH-3630A |
1080W |
0~36V |
0~30A |
9.3kg |
Description
The PSH-Series is
single output from 360W to 1080W, programmable switching DC power
supplies. OVP, OCP, and OTP protect the power supply and loads from
unexpected conditions. Remote sensing adds an extra level of
precision by compensating cable losses between loads. The bright LCD
with simultaneous parameter outputs allows effortless operation.
Self-test and software calibration features also reduce maintenance
efforts. SCPI commands and LabVIEW driver access through the RS-232C
or the optional GPIB interface allow remote control and ATE software
development. Modular architecture, dedicated rear-panel output, and
the 19 inch 4U rack mounting option ensure that the PSH-Series is
optimized for large systems.
| Programmable
Switching D.C. Power Supply |
|
Output Watts (W) |
Output Volts (V) |
Output Amps (A) |
Weight (kg) |
| PSH-2018A |
360W |
0~20V |
0~18A |
3.3kg |
| PSH-3610A |
360W |
0~36V |
0~10A |
3.3kg |
| PSH-3620A |
720W |
0~36V |
0~20A |
6.2kg |
| PSH-3630A |
1080W |
0~36V |
0~30A |
9.3kg |
Features
- Wide input voltage range and high power
factor (P.F)
- high efficiency and high power density
- Constant voltage and constant current
operation
- Over voltage over current and over
temperature protection
- Low ripple and noise
- Output on/off control
- Self-test and software calibration
- LabView driver
- Standard interface : RS-232C
- Optional interface : GPIB ( IEEE-488.2
)
