Description
Measure the
insulation resistance up to 100 GΩ
The SonelMIC-30 insulation resistance meter is a perfect response to
the expectations of users who deal with the testing of insulation of
electrical installations in a repeated manner, e.g. in single- and
multi-family buildings, as well as in public utility buildings and
small plants and workshops. The device enables the setting of the
measurement voltage within the range from 50 V to 1000 V in 10 V
steps, which makes it perfect for diagnosing electrical, control,
telecommunications and ICT facilities.
Main features
- Measurement of insulation resistance up to
100 GΩ thanks to max 1000 V measurement voltage
- Designed for harsh environmental conditions
conditions – IP67 ingress protection
- Excellent for repeatable measurements –
memory of 12,000 records and UNI-Schuko adapter for
sockets
- Allows for testing electrical continuity –
RCONT200 mA function
- Checking start capacitors in motors thanks to
capacity measurement function
…and much more
- Measurement voltage selected from: 50, 100,
250, 500, 1000 V or freely configurable within the range of
50…1000 V in steps of 10 V
- Continuous reading of measured insulation
resistance or leakage current
- Automatic discharge of the measured object’s
capacitance upon completion of insulation resistance
measurement
- Sound Signalling of five-second time
intervals, facilitating capture of time
characteristics
- Timing of measurement times T1, T2 and T3 for
measurement of one or two absorption coefficients, within
the range of 1… 600 seconds
- Readings of actual measurement voltage during
measurement
- Protection against measurement of live
objects
- Three-lead measurement – additional lead
GUARD
- Capacitance measurement during measurement of
RISO
- Low-Voltage measurement of circuit continuity
and resistance
- Continuity test of protective conductors and
equipotential bonding with current IISO≥200 mA
flowing in two directions in compliance with EN
61557-4
- Measurement of direct and alternating
voltages within the range of 0…600 V
Application
MIC-30 insulation resistance meter is perfectly suited for the needs
of all users, who often examine the condition of electrical systems
in single- and multi-family buildings as well as in public buildings
and in small
workshops or factories. With its test voltage settings from 50 V to
1000 V (in 10 V steps), the device is perfect for diagnosing the
electrical, control,
communication and telecommunications objects.
Features
Test voltage
settings of 500 V or 1000 V perfectly match the
requirements for assessing the protection of power supply lines but
also of floors and walls in places where the insulation of the stand
was used as a means of
protection against electric shock – PRS-1 probe (optional accessory)
is very useful for this purpose.
The dedicated UNI-Schuko adapter enables user to configure the
tested cable pairs – this ensures quick and efficient inspection of
the insulation resistance from the side of sockets.
With MIC-30 meter you can check whether an object is under voltage
(measuring range up to 600 V), both in overhead and cable networks
(measuring category of the device:
CAT IV 600 V). You can verify the continuity of cables, e.g. PE
connections and equipotential bonding – using the current of at
least 200 mA, according to EN 61557-4.
You can check the capacity of the start-up capacitors in household
appliances and drives of any type (measuring range up to 10 µF).
With the third socket (GUARD),
you can verify the amount of leakage current, which may “escape”
through faulty or contaminated insulation.
Built-in memory and wireless transmission ensure gathering and
transmission of data to software that provides archiving and
analysis (Sonel Reader).
All of this makes MIC-30 meter an essential tool for every service
technician.
Durable housing
Handy and
ergonomic housing provides protection of IP67, ensuring
reliability of the meter even in the harshest environmental
conditions (moisture, dust, high temperature, etc.)
