QUICK ENQUIRY

Integrated Services and Consultancy

(An ESA Group Associate)
#37, Second Floor, “Embedded Home”,
36th Cross, II Block, Rajajinagar
Bengaluru-560010,
Karnataka,India

Pratibha Gopalam
Executive Director
98454 03264

BANGALORE
Santanu Chatterjee, DGM-Sales
97313 78934

HYDERABAD
A V Gopalakrishna, Sr Engineer Sales-TMI
90082 96566

CHENNAI
Senthil Kumar, Manager-Sales
75500 76300

PUNE
Amol Kadu, Sales Manager-TMI
98450 44338

KOLKATA
Arun Roy, Manager-Sales
98305 78843

DELHI
Gaurav Rohilla, Sales Executive
72040 74949

VADODARA
Jaimin Shah, Application Engineer
73488 51143

Phone No.
080-67648888, 080-67648836

Sales

Email: sales@isc4esaindia.com


Support

Email: support@isc4esaindia.com

Email: service@isc4esaindia.com

Acute Technology Inc
TB3016F logic analyzer
Features
  • PC-based, USB 3.0 interface/power supply
  • 800 MHz timing analysis/200 MHz status analysis
  • Digital channels: 16 (Data), 1 (CLK), 2 (I²C/DP_AUX)
  • Storage space: PC RAM
  • Data real-time display , Synchronous display of waveforms after acquisition
  • Data recorder
Features
  • PC-based, USB 3.0 interface/power supply
  • 800 MHz timing analysis/200 MHz status analysis
  • Digital channels: 16 (Data), 1 (CLK), 2 (I²C/DP_AUX)
  • Storage space: PC RAM
  • Data real-time display , Synchronous display of waveforms after acquisition
  • Data recorder

Description

The TravelBus 3000 series is a product designed for the transportation equipment and automation control industries. It has two different signal and bus analysis modes: logic analyzer mode & protocol analyzer mode. In addition, TB3016F can directly measure the DP_Aux differential signal. Decode and support multiple protocols to capture and display simultaneously.

Common chip communication interface protocols include I²C, MIPI I3C 1.1, SPI, UART (RS232). These protocols are used to connect the chip to external modules or devices. Through these protocols, the chip can control the external modules or devices. These communication interface protocols are mainly used for data transmission between microcontrollers (MCU) and external modules.

Digital specifications
power supply USB bus-power (+5V)
Static power consumption 0.75W
Instantaneous maximum power consumption < 2.5W
Transmission interface USB 3.0
Timing analysis (asynchronous, highest sampling rate) 800MHz
Status analysis (synchronization, external clock) 200MHz
Data storage method Transition storage
aisle 19
total memory
Timing analysis N/A
2GHz timing [number of channels available] - memory per channel N/A
1GHz timing [number of channels available] - memory per channel N/A
500MHz timing [number of channels available] - memory per channel N/A
250MHz timing [number of channels available] - memory per channel N/A
Inter-channel phase error N/A
Input voltage channel N/A
Input voltage impedance 200KΩ // <5pF< /td>
Non-maximum destructive withstand voltage ±40V DC, 15Vpp AC
Input voltage operating range N/A
Input voltage sensitivity 0.5Vpp@150MHz
Trigger voltage group 2 (ch0~7, ch8~15 & clk0)
Trigger voltage range ±6V
Trigger voltage resolution 50mV
Reference voltage accuracy ±100mV + 5%*Vth
Trigger resolution 1.25 ns
Trigger type Channel, Pattern, Single, Width, Time-out, External
bus trigger I²C, MIPI I3C 1.1, SPI, UART (RS232)
Agreement Analysis I²C, MIPI I3C 1.1, SPI, UART (RS232)
Read More Sales Enquiry